Monitor dimensions

KTC H49S66

The KTC H49S66 is a 49-inch 32:9 monitor (5120 x 1440, 180Hz). Measured along the curve, its screen is about 47.2 x 13.3 inches (119.8 x 33.7 cm), and 45.31 x 22.52 x 15.59 in with the stand. Check the desk footprint and setup fit below before you buy.

Fit read

The active panel is about 47.2 inches wide and 13.3 inches tall. Chassis and stand dimensions can matter more than diagonal once it reaches your desk.

Screen width

47.2 in

Screen height

13.3 in

Screen area

626 sq in

Pixel density

109 PPI

Desk fit

How much space this screen uses

32:9

The visible panel is about 47.2 inches wide and 13.3 inches tall. Use those dimensions to check desk width, monitor-arm clearance, viewing distance, and whether another display can sit beside it.

Desk body width

45.3 in

Stand depth

15.6 in

Compare class

32:9

Display specs

Size49 in
Display class32:9
Aspect ratio32:9
Resolution5120 x 1440
Refresh rate180 Hz
Panel typeVA
Curve1000R
Surfaceanti-glare

Body and stand dimensions

With stand45.31 x 22.52 x 15.59 in
Without standNot specified
Stand depthNot specified
WeightNot specified
Weight without standNot specified
VESA100 x 100
Height adjustment5.12 in

How it compares

Shape and desk numbers for the KTC H49S66

Against a 49-inch 16:9 screen

10% wider, 45% shorter

A 16:9 screen at 49 inches is 42.7 x 24 in; this panel is 47.2 x 13.3 in, with 39% less screen area.

Same layout as two screens

Two 27.1-inch 2560 x 1440

A 32:9 panel is two 16:9 screens side by side with no bezel between them, at the same 109 PPI.

On a 72 x 30 in desk

63% of the width

The listed chassis is 45.3 in wide (115.1 cm), leaving 26.7 in of a 72-inch desk; the listed depth of 15.6 in uses 52% of a 30-inch-deep desk. The setup builder starts with this desk.

References

Product details can vary by region and retailer. Confirm current availability, included stand, and final dimensions on the linked product pages before purchasing.

Similar monitor dimensions

Compare this product against other monitors with nearby size, aspect ratio, or use case before assuming the same class takes the same space.